MEVA MEP ALU Shoring

The MEVA MEP ALU shoring systems are versatile yet simple systems capable of handling virtually any project with only a few basic components: props, extensions and frames. They’re flexible height adjustments make them the ideal systems to;

• Shore slab formwork at great heights
• Shore table forms (frame construction)
• Using table forms for large slab areas
• Support balconies, prefab parts and beams

Slabs from 6′-0″ to 69′-0″ height can be poured with only two prop types (MEP 300 and MEP 450) plus extensions.

The SAS quick-lowering system – another MEVA invention – releases the stress in the prop with one strike of a hammer. After stripping, the prop automatically resets and locks in its original position.

The calotte support is used as foot plate for MEP props and extension pieces on sloped surface for perpendicular load transfer. Adjustable diagonal cross-braces permit a flexible prop spacing from 90 cm to 300 cm. Depending on the ground and load, different frames can be used for the shoring towers.

Shoring towers or tower units can be transported in several ways: vertically with the crane hanger or transport spreader, or horizontally with the lift truck or transport waler. When using the transport spreader, the props are folded up with the help of the folding part and flown with the slab formwork to their new place of use.