Aluminum Beam Gang Form System

Our Aluminum Beam Gang forming system is an adaptable wall forming system, utilizing components from several Trekker concrete forming systems.  With two beam sizes, two waler sizes, and two capacities of ties, a wide variety of beam spacings and tie patterns can be accommodated.

The Trekker Aluminum Beam Gang Form is a composite wall forming system, utilizing components from other systems. At the heart of this system are Aluminum Beams, or Aluminum Joists, which have a very high strength-to-weight ratio. The Aluminum Beams (or Joists) are fastened to Steel Walers by means of our unique Beam Attachment Clamps. A suitable plywood is attached to the resulting rigid, compact, and lightweight lattice; thus, becoming the basic gang form.

A unique feature of the Aluminum Beam Gang Form is the Transition Bracket. This bracket allows the Aluminum Beam Gang Form to mate with components of other wall forming systems. The proven versatility of Steel-Ply® and TRK HD Clamp accessories can thus be utilized with the Aluminum Beam Gang Form, to achieve a wide range of forming conditions, such as corners, pilasters, bulkheads, core walls, curved walls, and other configurations.

Since Trekker has two aluminum beam sizes, two waler sizes, and two capacities of ties available for use on the Aluminum Beam Gang Form, a wide variety of beam spacings and tie patterns can be utilized. The Trekker Form Designer is available to help with the selection of the components that will best fulfill the requirements of the particular job conditions.